Removing the tandem brake master cylinder (vehicles with automatic transmission)

Preliminary work 

• Refer to REMOVING THE COVER OF THE ENGINE COMPARTMENT AT THE REAR LEFT .
• Refer to IF INSTALLED: REMOVING STRUT BRACE IN THE REAR OF THE ENGINE COMPARTMENT .
• Refer to REMOVING THE EXPANSION TANK (VEHICLE WITH AUTOMATIC TRANSMISSION) .

1. Unfasten brake lines.

   Courtesy of BMW OF NORTH AMERICA, INC.

2. Loosen nuts (1) and remove tandem brake master cylinder (2).

Courtesy of BMW OF NORTH AMERICA, INC.