Removing the brake pedal travel sensor

Preliminary work 

• Refer to REMOVING THE TRIM PANEL FOR PEDAL ASSEMBLY .

• Unlock plug connection (1) and disconnect.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).
• Remove the brake pedal travel sensor (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (2).
• Remove holder (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the nut (1).
• Check the O-ring (3) for damage and replace if necessary.
• Remove the tappet (2).

Courtesy of BMW OF NORTH AMERICA, INC.