Install front brake hose

• Fit and tighten brake hose (1) on brake caliper.

If necessary, grip at knurling (2).

Never twist brake hose and avoid all contact with components attached rigidly to the body.

Courtesy of BMW OF NORTH AMERICA, INC.

• Attach the brake hose in the holders (3).
• Attach and tighten union screw (1).

  Hold on to square shaft, if necessary (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to REMOVING THE BRAKE PEDAL TENSIONER .
• Refer to ATTACHING THE FRONT LEFT WHEEL .
• Refer to CONNECTING THE BLEEDER UNIT FOR THE BRAKE FLUID .
• Refer to FLUSHING AND BLEEDING THE FRONT AXLE BRAKE CIRCUIT .
• Refer to DISCONNECTING THE BLEEDER UNIT FOR THE BRAKE FLUID .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .