Removing the tandem brake master cylinder (vehicles with manual transmission)

Preliminary work 

• Refer to REMOVING THE COVER OF THE ENGINE COMPARTMENT AT THE REAR LEFT .
• Refer to IF INSTALLED: REMOVING STRUT BRACE IN THE REAR OF THE ENGINE COMPARTMENT .
• Refer to REMOVING THE EXPANSION TANK (VEHICLES WITH MANUAL TRANSMISSION) .

• (1)  Unfasten brake lines.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen nuts (1)  and remove tandem brake master cylinder (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.