Installing the wiring harness for the convertible top latch

• Position and clip wiring harness (4) into all the holders.
• Position Hall effect sensors (2).
• Secure the left and right expanding rivets (1).
• Connect plug connection (3) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect plug connection (3) and lock.
• Position convertible top drive (2).
• Align the convertible top drive with the markings made and tighten screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING CONVERTIBLE TOP BOW, FRONT .
• Refer to ADJUSTING DOOR WINDOW GLASS .
• Refer to ADJUSTING THE REAR SIDE WINDOW .