Installing the seal for the glass slide/tilt roof panel
- Position the seal from the glass slide/tilt roof panel (1) on the groove on the glass slide/tilt roof panel (2) and press in.
Ensure that seal (1) rests fully all around the glass slide/tilt roof panel.
NOTE:
Coat the seal with a suitable lubricant.
CONSUMABLE SPECIFICATION
| Lubricant M | 30 ml | 83 19 2458653 |
Follow-up work
- Refer to INSTALLING GLASS SLIDE/TILT SUNROOF PANEL .
- Refer to CHECKING THE SETTING OF THE GLASS SLIDE/TILT SUNROOF PANEL .
- Refer to ADJUSTING GLASS SLIDE/TILT SUNROOF PANEL .
- Refer to INITIALIZING THE GLASS SLIDE/TILT SUNROOF .
- Refer to INSTALLING THE BELLOWS FOR THE GLASS SLIDE/TILT SUNROOF .