Installing the bumper cover lower section

Check 

• Check the detents (arrows) on bumper cover lower section (1)  for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» The detents (arrows) are damaged.

Measure 

• Replace the bumper cover lower section (1)  .
• Position the bumper cover lower section (1)  and clip it into the detents (arrows).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
• Refer to PARTIALLY INSTALLING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
• Refer to INSTALLING THE COVER FOR CENTER ENGINE COMPARTMENT .
• Refer to INSTALLING THE FRONT HOOD SEAL .