Removing the front emblem
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Mask the working area around the emblem (1) with adhesive tape.
- Carefully heat the emblem (1) with a hot air blower (temperature approx. 40-55°C) and lever out with the special tool 0 496 571 (00 9 327) .