Supplying The New Parts Required
Precondition
- Vehicle is secured on the straightening bench.
NOTE:
TECHNICAL INFORMATION
- Observe the procedure for repair stage 3.
For additional information see: 41 00... Repair method for repair stage 3
- For information about stripping and rebuilding operations, refer to the surrounding text in the AIR. See the FRU number.
Preliminary work
- Procure the following new parts (see Electronic Parts Catalog):
Center engine mount (1)
Reinforcement of engine mount, inner (2)
Holder of dynamic stability control (DSC) (3)
Holder of radio data system (RDS) (4)
NOTE: TECHNICAL INFORMATION
For additional information see: 41 00...
Overview of consumables in Electronic Parts Catalog - Supply the following consumables:
| Material | Quantity |
|---|---|
| Adhesive K1 | 1 |
| Blind rivet N1 | 25 |
| Blind rivet N2 | 20 |
| Earth pin | 5 |
| Coarse thread bolt | 5 |
| EMC screw | 3 |
| Cleaning agent R1 | 1 |
| Cleaning agent R2 | 1 |
| Sealing compound | D1 |
| Cavity protection wax remover |