Remove front ornamental grille
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
NOTE:
The following step(s) must be performed if the listed component(s) is/are installed.
- Release the front camera (1)
from the detents (2)
and feed out from the radiator ornamental grille.
The front camera (1) remains connected to the wiring harness.
NOTE:
The following step(s) must be performed if the listed component(s) is/are installed.
- Unlock the detents (1)
and feed out the ultrasonic sensors (2)
from the front ornamental grille.
The ultrasonic sensors (2) remain connected to the wiring harness.
- Release the wiring harness (3) with the holder (4) .
- Detach the wiring harness (3)
from all holders on the radiator ornamental grille.
- Release the radiator ornamental grille at the detents (arrows) and remove it.