Install the control unit for the power tailgate (HKL)
- Connect the connector (1)
with the control unit for automatic tailgate operation (2)
and lock it.
- Position the control unit for automatic tailgate operation (1) and install it in the holder (2) downwards.
Follow-up work
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON RIGHT .
- Refer to INSTALLING LED IN LUGGAGE COMPARTMENT ON RIGHT .
- Refer to INSTALLING COVER FOR LUGGAGE COMPARTMENT ON RIGHT .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to INSTALLING THE FRONT STORAGE SHELF .
- Refer to CONNECTING ALL BATTERY GROUND LEADS .
- Refer to ACTIVATING THE 48V ELECTRICAL SYSTEM .