Removing the low power distribution box

Preliminary work 

• Refer to DEACTIVATING THE 48V ELECTRICAL SYSTEM .
• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .

• Loosen cover (1) at the clip mechanisms and place to the side.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen nut (1).
• Remove positive battery cable and secure at side.
• Loosen screws (2).
• Remove positive battery cables and secure at side.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the plastic nut (1).
• Remove the power distribution box (2).

Courtesy of BMW OF NORTH AMERICA, INC.