Removing the seat frame
Preliminary work
- Refer to CHECKING THE FRONT SEAT FOR DAMAGE .
- Refer to REMOVING DRIVER'S SEAT .
- Refer to FOR CONTINUING WORK ON THE FRONT SEAT: MOUNTING THE FRONT SEAT ON THE UNIVERSAL SEAT MOUNTING AND CONNECTING WITH THE WIRING HARNESS IF NECESSARY .
- Refer to REMOVING THE REAR PANEL ON THE FRONT SEAT BACKREST .
- Refer to REMOVING THE HEAD RESTRAINT .
- Refer to REMOVING OUTER COVER ON FRONT SEAT .
- Refer to REMOVING INNER COVER FROM THE FRONT SEAT .
- Refer to REMOVING THE BACKREST COVER WITH THE CUSHION .
- Refer to REMOVING THIGH SUPPORT .
- Refer to REMOVING SEAT COVER WITH CUSHION FOR DRIVER'S SEAT .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
NOTE:
The operations shown only for one side must be carried out on both sides.
- Loosen screws (1)
.
- Remove the seat frame (1)
.NOTE: TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment. - Release all attached parts from the seat frame (1) .