Removing the LED module for the left and right turn signal lamps
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: 61 35... NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION
NOTE:
Description is for left component only. Procedure on the right side is identical.
Removing the LED module for the turn signal lamps
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Loosen screws (1).
- Pull LED module (2) out of headlight.
- Unlock and disconnect the plug connection (1) on the LED module (2).