Installing the camshaft position sensor of the exhaust camshaft
- Replace sealing ring (1).
Parts: Sealing ring
- Guide the camshaft position sensor of the exhaust camshaft (3) in and install.
- Tighten down screw (2).
TIGHTENING TORQUE SPECIFICATION
| Camshaft position sensor to cylinder head cover | ||
|---|---|---|
| TS5x20 | Tightening torque | 4 Nm |
- Connect connectors (1) and lock.
The connector (1) must engage audibly.
Follow-up work
- Refer to INSTALLING ACOUSTIC COVER .