Installing the lid for the rear differential (M Sport differential)

• When positioning the lid, ensure that pin (1)  is aligned in gap (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the lid (2)  .
• Tighten down screws (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to RAISING REAR DIFFERENTIAL AND SECURING (WITH GHAS) .
• Refer to CHECK/TOPPING UP OIL LEVEL IN THE REAR DIFFERENTIAL .
• Refer to INSTALLING THE REAR HEAT SHIELD .
• Refer to INSTALLING THE COVER OF THE CAMBER CONTROL ARM ON THE LEFT AND RIGHT .
• Refer to INSTALLING THE COMPLETE EXHAUST SYSTEM .
• Refer to INSTALLING THE CONNECTING SUPPORTS ON THE TUNNEL .