Apply liquid sealing compound
NOTE:
TECHNICAL INFORMATION
The processing time of the liquid sealing compound can be at a maximum of 10 min.
Commissioning of the assembly is not possible until 25 minutes after the processing time.
Non-observance can lead to leaks in the assembly.
The processing time of the liquid sealing compound can be at a maximum of 10 min.
Commissioning of the assembly is not possible until 25 minutes after the processing time.
Non-observance can lead to leaks in the assembly.
- Position the liquid sealing compound (1)
on the special tool as depicted 2 469 803.
Parts: Liquid sealing compound
SEALING COMPOUND SPECIFICATION
| Loctite 5970 liquid sealing compound Processing time <10 minutes at room temperature |
50 ml, Cartridge | 83190404517 |
- Apply liquid sealing compound along the dashed line (1)
on the sealing surface on the housing of the rear differential.
The sealing bead must run along the inner edge.