Installing the right knee airbag
WARNING:
Airbag unit.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- Before performing any work on the airbag, always disconnect the battery ground lead from the battery.
- Airbag unit may only be set down with the cushion (airbag itself) facing upwards.
- For additional information see: 72 00 SAFETY REGULATIONS ON HANDLING COMPONENTS WITH GAS GENERATORS
WARNING:
Pyrotechnic components.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
- Replace any damaged part or ones that have been dropped.
- For additional information see: 72 00 SAFETY REGULATIONS ON HANDLING COMPONENTS WITH GAS GENERATORS .
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Correctly position the knee airbag (2).
- Tighten nuts (1).TIGHTENING TORQUE SPECIFICATION
Knee airbag to support structure Nut Tightening torque 8 Nm - Connect connectors (1) and lock.
Follow-up work
- Refer to RECONNECTING ALL BATTERY GROUND LEADS .
- Refer to INSTALLING RIGHT FOOTWELL TRIM .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .