Partially installing the charge air line
- Check the sealing ring (1) on the charge air line (3) for damage and replace, if necessary.
- Connect the charge air line (1) to the throttle valve (2).
- Tighten down screws (3).
TIGHTENING TORQUE SPECIFICATION
| Charge air line to throttle valve | ||
| M6x30 | tightening torque | 8 Nm |
- Connect connectors (2) and lock.
The connector (2) must engage audibly.
- Connect connectors (1) and lock.
The connector (1) must engage audibly.