Installing the right seat belt finisher strip

Install the seat belt finisher strip 

Check 

• Check the clamps (1) on the seat belt finisher strip for damage; if necessary, replace them.
• Check the detent (2) on the seat belt finisher strip for damage.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Result 

  » Detent (2) is damaged

  Measure

  • Replace the seat belt finisher strip.
• Feed the safety belt through the seat belt finisher strip.
• Clip in the seat belt finisher strip with the detent (3) and clamps (2).
• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.