Securing cable of rear left and right wheel speed sensor

NOTE: Perform the steps on the left and right side.

Attaching the cable of the rear wheel speed sensor

Connect connectors (2) and lock.
Attach the cable of the wheel speed sensors on the brackets (1) .

Courtesy of BMW OF NORTH AMERICA, INC.
Guide the wheel arch cover (2) in.

Tighten the screws (1) .

TIGHTENING TORQUE SPECIFICATION

Rear wheel arch cover to bumper cover
Hexagon screw	tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.