Installing the oil deflector

Install the oil deflector (1) .
Replace the screws (arrows).
Parts: Screws

Tighten all the screws (arrows) crosswise.

TIGHTENING TORQUE SPECIFICATION

Oil deflector to crankcase
M8 x 35 Replace screws.	Tightening torque	15 Nm
	Angle of rotation	45°

G11644981

Courtesy of BMW OF NORTH AMERICA, INC.

Replace screws (marks).
Parts: Screws
Guide in and position the oil deflector (1) .

Tighten screws (marks) in crosswise sequence using the special tool 0 490 504 (00 9 120).

TIGHTENING TORQUE SPECIFICATION

Oil deflector to crankcase
M8x35 Replace screws.	Joining torque	15 Nm
	Angle of rotation	45°

G14416291

Courtesy of BMW OF NORTH AMERICA, INC.