Install the stiffening plate

Precondition 

Torsion struts removed.

• Position thrust field (3)  .
• Replace the screws (1)  .

  Parts:  Screws

• Screw in the screws (1)  a few turns.
• Tighten the screws (2)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Thrust field to reinforcement strut
  M10x16	Tightening torque	56 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Thrust field to front axle support
  M 10x25 Replace screws.	Screw in all the screws by several rotations.
  	Tightening torque	56 Nm
  	Angle of rotation	90°