If installed: Remove the engine oil cooler

WARNING: Hot surfaces.
Risk of burning!

WARNING: Hot fluids.
Risk of scalding!

Conduct all work in the vehicle wearing appropriate personal protective equipment only.

NOTE: TECHNICAL INFORMATION
The work must be performed with vehicle care to prevent component damage.

NOTE: TECHNICAL INFORMATION
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.

Loosen screws (1) .
Loosen screw (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Drill out the rivet (1) .
Remove the damper (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen nuts (1) .
Disconnect the lines (2) .
Collect and dispose of emerging fluids.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1) .
Feed out the engine oil cooler (2) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.