If installed: Installing the silencer of the parked-car heating
- Installing the silencer
- Feed in and install the silencer (3) .
- Slide silencer (3) up onto the auxiliary heater.
- Tighten nut (2)
.TIGHTENING TORQUE SPECIFICATION
Silencer on stationary heater Nut tightening torque 6 Nm - Tighten down screws (1)
.TIGHTENING TORQUE SPECIFICATION
Silencer on holder/holder on body Screw tightening torque 8 Nm Nut tightening torque 8 Nm