Installing the throttle body

• Replace sealing ring (1).

  Parts:  Sealing ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace sealing ring (1).

  Parts:  Sealing ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in and install the throttle body (3),
• Connect and lock the connector (2).
• Tighten screws (arrows).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Throttle body to intake plenum
  M6X50	tightening torque	7 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Throttle body to holder
  M6X25	Tightening torque	8 Nm

• Insert and install charge air line (1).
• Tighten screws (arrows).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Charge air line to throttle body
  M6	tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1).
• Connect and lock the connector (2).
• Secure clamps (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING ACOUSTIC COVER .