Replacement: Remount mounted parts

NOTE: RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.

Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060 .
Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Release the oil filler cap (1) .
Loosen screw (2) .
Feed out and remove the intake camshaft sensor (3) .
Loosen screw (4) .
Feed out and remove the exhaust camshaft sensor (5) .

Courtesy of BMW OF NORTH AMERICA, INC.

Prepare the camshaft position sensor
Check sealing ring (1) for damage, replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert and install the exhaust camshaft sensor (5) .

Tighten down screw (4) .

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATION

Exhaust camshaft sensor to cylinder head cover
TS5x20	tightening torque	4 Nm

Tighten down screw (2) .

TIGHTENING TORQUE SPECIFICATION

Intake camshaft sensor to cylinder head cover
TS5x20	tightening torque	4 Nm