Installing the acoustic cover for the engine, front

• Check the acoustic cover (2) in the marked areas (1) for damage and replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Thread in and position the acoustic cover (2).
• Mount all the expanding rivets (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the wiring harness section (3) and position.
• Secure clamps (2).
• Connect connectors (1) and lock.

The connector (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

• Secure clamps (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE CLEAN AIR PIPE WITH THE RESONATOR .
• Refer to INSTALLING ACOUSTIC COVER .