12 36 CONTROL SYSTEM, HYBRID/ELECTRIC DRIVE (M440i and M440i xDrive coupe, convertible, and Gran Coupe sedan)
1236 TIGHTENING TORQUE OVERVIEW
| Clamp of excitation cable to housing | |||
| M5 Replace screw. |
Tightening torque | 4 Nm | |
| Clamp of excitation cable to threaded bolt | |||
| M5 | Tightening torque | 3.9 Nm | |
| Double threaded bolt & to housing | |||
| M5 Replace nut. |
Tightening torque | 4.5 Nm | |
| Electrical machine electronics busbar to aggregate connection | |||
| M5 Replace screw. |
Tightening torque | 4.5 Nm | |
| Electrical machine electronics to housing | |||
| M6 Replace screw. |
Tightening torque | 8 Nm | |
| Angle of rotation | 90° | ||
| EME busbar at high-voltage connection | |||
| M5 Replace screw. |
Tightening torque | 4.5 Nm | |
| Excitation cable to electrical machine electronics | |||
| M5 | Tightening torque | 3.9 Nm | |
| High-voltage connector to electric drive unit | |||
| M8x46 | Tightening torque | 19 Nm | |
| Shield plate to housing & Y-cable at housing | |||
| M5 Replace screw. |
Tightening torque | 4.5 Nm | |