Installing camshaft position sensor of intake camshaft
- Replace sealing ring (1).
Parts: Sealing ring
- Thread in and install the camshaft position sensor of the intake camshaft (3).
- Tighten down screw (2).
TIGHTENING TORQUE SPECIFICATION
| Camshaft position sensor to cylinder head cover | ||
|---|---|---|
| TS5x20 | Tightening torque | 4 Nm |
- Connect and lock the connector (1).
The connector (1) must engage audibly.
Follow-up work
- Refer to INSTALLING ACOUSTIC COVER .