Cutting out the contour for the footwell light
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- Cut out the contour (1) with a suitable tool along the mark.
Follow-up work
- Refer to INSTALLING THE SWITCH FOR THE TAILGATE RELEASE .
- Refer to INSTALLING THE LED MODULE OF THE FRONT DOOR POCKET .
- Refer to INSTALLING THE LED MODULE ON THE REAR DECORATIVE STRIP .
- Refer to INSTALLING LED MODULE AT THE FRONT DECORATIVE STRIP .
- Refer to INSTALLING THE CENTRAL LOCKING BUTTON .
- Refer to INSTALLING THE CONTROL UNIT FOR THE ADDITIONAL SEAT FUNCTION .
- Refer to INSTALLING THE ENTRY LIGHT IN THE FRONT DOOR TRIM PANEL .
- Refer to INSTALLING THE POWER WINDOW SWITCH ON THE DRIVER'S SIDE .
- Refer to INSTALLING DOOR WIRING HARNESS AT THE FRONT DOOR TRIM PANEL .
- Refer to INSTALLING THE SOUND INSULATION ON FRONT DOOR TRIM PANEL .
- Refer to INSTALLING THE FRONT DOOR TRIM PANEL .