Installing front door window glass
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Insert door window glass front (3) from the top.
- Press the holder (1)
on the lug (2)
in arrow direction and lock it in place.
- Screw in the screws (1)
and tighten them.
Countersupport multi-tooth nuts of the power window while doing so.
TIGHTENING TORQUE SPECIFICATIONDoor window glass to power electric windows Screw Tightening torque 0.25 Nm - Connect connectors (2) and lock.
Follow-up work
- Refer to INSTALLING THE MODULE BRACKET ON THE FRONT DOOR .
- Refer to INSTALLING FRONT DOOR TRIM PANEL .
- Refer to CONNECTING ALL BATTERY GROUND LEADS .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to ADJUSTING DOOR WINDOW GLASS .
- Refer to INSTALLING OUTER WINDOW CHANNEL STRIP .