Removing the rear convertible roof brace
Precondition
- Battery charger connected.
CAUTION:
Folding up of convertible top through loss of pressure in hydraulic cylinders
.
Injury hazard! Injury hazard by trapping!
Injury hazard! Injury hazard by trapping!
- When carrying out all repair work, secure soft top and soft top compartment lid with a suitable support tool against collapsing. Ensure soft top is supported in the middle.
- Bring the convertible top (1) to the half opened position.
Secure the convertible top (1) from collapsing by using the support 2 452 010 if necessary.
NOTE:
Perform the steps on the left and right side.
- Mark the position of the convertible roof brace (3) in the areas (2).
- Loosen the screws (1) and guide out the convertible roof brace (3) with the help of a support person.