Removing the center convertible roof brace

Precondition

CAUTION: Folding up of convertible top through loss of pressure in hydraulic cylinders .
Injury hazard! Injury hazard by trapping!

When carrying out all repair work, secure soft top and soft top compartment lid with a suitable support tool against collapsing. Ensure soft top is supported in the middle.

Courtesy of BMW OF NORTH AMERICA, INC.

Bring the convertible top (1) in the half opened position.
Secure the convertible top (1) from collapsing by using the support 2 452 010 if necessary.
Feed out the edge stripping of the convertible top fabric (1) in arrow direction from the convertible top bow (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Release the retaining clip (1).
Guide out bolt (2).
Guide the tension cable (3) out of the guides (4).
NOTE: Document the position of the tension cables in the guides before removal.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed out the tension cable (1) further in arrow direction from the guides on the convertible top bow (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Unhook the tension cable (1) on the convertible top bow (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the left and right side.
Mark the position of the convertible roof brace (3) in the areas (2).
Loosen the screws (1) and guide out the convertible roof brace (3) with the help of a support person.

Courtesy of BMW OF NORTH AMERICA, INC.