Installing the rear power window switch

Feed the power window switch (3) into the door trim panel (2) and clip into the detent (4) .
Attach the power window switch (3) using repair screws (1) .

Tighten the repair screws (1) .

TIGHTENING TORQUE SPECIFICATION

Power window switch on door trim panel
Screw	Tightening torque	2 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

CONSUMABLE SPECIFICATION

Repair screw
Delta PT4

ø4 mm,
l = 12 mm,

07149200941

Courtesy of BMW OF NORTH AMERICA, INC.