Installing the tailgate seal
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Remove sealant residue from the sheet metal flange.
- Clean sheet metal flange.
- Replace tailgate seal (1).
Parts: Tailgate seal
- Mount tailgate seal (1), starting from the center at the top.
- Ensure that tailgate seal (1) rests correctly on all the adjacent trim panel components.
Check
- Check the closing function of the trunk lid.
Result
» The trunk lid does not close correctly.
Measure
- Ensure that tailgate seal (1) rests correctly on all the adjacent trim panel components.
Follow-up work
- Refer to FASTENING REAR HEADLINING .
- Refer to INSTALLING D-PILLAR TRIM PANEL ON LEFT AND RIGHT .
- Refer to INSTALLING THE LEFT AND RIGHT C-PILLAR TRIM PANEL .
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON RIGHT .
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Refer to INSTALLING THE LED IN THE LEFT AND RIGHT CARGO AREA .
- Refer to INSTALLING COVER OF THE LUGGAGE COMPARTMENT SIDE SHELF LEFT AND RIGHT .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to INSTALLING THE FRONT STORAGE SHELF .