Installing The Rear Luggage Compartment Floor

• Pre-clean bonding surfaces on vehicle and on new part with cleaning agent R2.
  CONSUMABLE SPECIFICATION
  
  

  Cleaning agent R2

  500 ml

  83190417324

• Clean bonding surfaces on vehicle and on new part with cleaning agent R1.
  CONSUMABLE SPECIFICATION
  
  

  Cleaning agent R1

  100 ml, Bottle

  83192211217

• Apply adhesive K5 to the bonding surfaces.
  ADHESIVE SPECIFICATION
  
  

  Body adhesive K5

  50 ml

  83192158654

• Install the new part and rivet in areas (1) to (3) with blind rivets N3.

Courtesy of BMW OF NORTH AMERICA, INC.

Installing the EMC screw 

• Drill a hole with a diameter of 4.2 mm.

  In the case of glued connections, only drill the hole after the adhesive has fully hardened.

• Screw in the EMC screw.
  CONSUMABLE SPECIFICATION
  
  

  EMC screw

  SF Plus M5x15

  83190301639

• Seal the EMC screw with the sealant.

• After the adhesive has hardened, install 3 EMC screws in the areas (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work