Removing trim panels on the operating facility in the center console
NOTE:
Risk of damage
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. only use the original packaging for returning the product. always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with esd symbol).
- For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .
NOTE:
Risk of damage
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
Preliminary work
- Refer to DEACTIVATING THE 48V ELECTRICAL SYSTEM .
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
- Refer to REMOVING THE SELECTOR LEVER .
NOTE:
Risk of damage
Damage of high-quality surfaces.
Plastic wedges can damage high-quality surfaces.
Damage of high-quality surfaces.
Plastic wedges can damage high-quality surfaces.
- Protect surfaces from damage.
- Press trim for the parking brake button (1) in the arrow direction, forward and downward.
NOTE:
The trim of the parking brake button comes loose when it is pressed vigorously out of the catches (markings).
- Unclip the trim with the special tool 0 493 681 (64 1 020) in the marked area.