Installing both sport leather steering wheel switches
NOTE:
The operations shown only for one side must be carried out on both sides.
- Position the switch (2) on the design trim and tighten with screws (1).
tightening torque specification
| Mfl switch | ||
|---|---|---|
| Screw ts5x12 | Tightening torque | 1.5 nm |
- Connect connectors (3) and lock.
Follow-up work
- Refer to INSTALLING THE SHIFT PADDLE FOR THE AUTOMATIC TRANSMISSION .
- Refer to INSTALLING THE AIRBAG UNIT (SPORTS STEERING WHEEL) .
- Refer to CONNECTING ALL BATTERY GROUND LEADS .
- Refer to ACTIVATING THE 48V ELECTRICAL SYSTEM .