Installing the guide sleeves for the front head restraint (optional equipment 4NA air collar)

• Pay attention to the installation position:

  Insert the guide sleeve (1) with visible  unlocking in the driving direction on the left.

  Insert the guide sleeve (2) without visible  unlocking in the driving direction on the right.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: The description is provided only at one component. The procedure is the same for all other components.
• Position the guide sleeve (1) in the backrest frame in the arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Engage the guide sleeves (1) in arrow direction.

  The detents (2) of guide sleeves must engage noticeably.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Only on (front) passenger seat: 

Correctly position the cover (1) for the backrest release in the marked area.

Clip in the detents (2) of the cover (1) for the backrest release.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE FRONT HEAD RESTRAINT (OPTIONAL EQUIPMENT 4NA AIR COLLAR) .
• Refer to INSTALLING THE REAR PANEL ON THE FRONT SEAT BACKREST .