Remove A-pillar trim panel, left and right

NOTE: Description is for left component only. Procedure on the right side is identical.

Removing the A-pillar trim panel

WARNING: Pyrotechnic components .
Danger! Immobilization period-threatening injuries!

All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
Replace any damaged part or ones that have been dropped.
For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

NOTE: RISK OF DAMAGE
Damage to the head airbag .
Improper use of a tool when removing the trim panel may damage the head airbag .

Unclip cover (1) using a suitable special tool from the set of special tools 0 493 752 (00 9 329) .
Loosen screw (2).
Unclip A-pillar trim panel (3) with clips (4) and guide it out upwards.

Courtesy of BMW OF NORTH AMERICA, INC.