Installing the antenna amplifier
NOTE:
TECHNICAL INFORMATION
The number of connectors on the described component may vary depending on the equipment version.
If necessary, unlock and disconnect, or connect and lock, all other connectors.
The number of connectors on the described component may vary depending on the equipment version.
If necessary, unlock and disconnect, or connect and lock, all other connectors.
- Correctly position the antenna amplifier (3).
- Tighten down screw (2).
TIGHTENING TORQUE SPECIFICATION
| Antenna amplifier to body | ||
|---|---|---|
| Screw | tightening torque | 3 Nm |
- Connect connectors (1) and lock.
Follow-up work
- Refer to INSTALLING THE TAILGATE TRIM PANEL .