Installing the rear mid-range speaker
- Guide in and install mid-range speaker (3).
- Tighten the screws (2).
TIGHTENING TORQUE SPECIFICATION
| Speaker to rear shelf/support/head restraint | ||
|---|---|---|
| Screw | Tightening torque | 1.8 Nm |
- Connect connectors (1) and lock.
Follow-up work
- Refer to INSTALLING THE SEAT BELT FINISHER STRIP .
- Refer to INSTALLING THE STRAP FITTING AT THE REAR .
- Refer to INSTALLING THE REAR SEAT .
- Refer to INSTALLING D-PILLAR TRIM PANEL .
- Refer to INSTALLING C-PILLAR TRIM PANEL .
- Refer to INSTALLING THE COVER OF THE LUGGAGE COMPARTMENT .
- Refer to INSTALLING THE FRONT STORAGE SHELF .