Removing the tweeter in the rear side trim panel
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING THE REAR OUTER WINDOW RECESS FINISHER STRIP .
- Refer to REMOVING THE INNER DOOR SILL COVER STRIP .
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVING LEFT AND RIGHT BACKREST SIDE SECTION .
- Refer to REMOVING REAR SEAT BACKREST .
- Refer to REMOVING THE HEAD RESTRAINT ON REAR LEFT AND RIGHT .
- Refer to REMOVING THE REAR LEFT AND RIGHT HEAD RESTRAINT GUIDES .
- Refer to REMOVING THE TRIM PANEL AT THE TOP OF THE ROLLOVER PROTECTION SYSTEM .
- Refer to REMOVING REAR SIDE TRIM PANEL .
- Refer to REMOVING THE SOUND INSULATION ON THE SIDE TRIM PANEL .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- If necessary, slide the acoustic fleece slightly to one side.
- Unlock plug connection (1) and disconnect.
- Unclip the resistance (2) .
- Unlock the locks (arrowed).
- Remove tweeter (3) .