Replacing the receiver audio module (RAM)

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

• Loosen nuts (1)  .
• Remove the receiver audio module (RAM) (2)  from the holder (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the receiver audio module (RAM) (2)  .

  Parts:  Receiver audio module (RAM)

• Fit the receiver audio module (RAM) (2)  on the holder (3)  .
• Tighten nuts (1)  .

TIGHTENING TORQUE SPECIFICATION

Amplifier/RAM to holder
M5 screw Nut	Tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.