Installing the Receiver Audio Module (RAM)

Version with Parking Assistant Plus (5DN): Install the TRSVC control unit 

Install the TRSVC control unit 

• Feed in and position the TRSVC control unit (3) with the holder.
• Engage the cable bracket (2).
• Connect connectors (1) and lock.
• Turn over the TRSVC control unit (3) with the holder.

Courtesy of BMW OF NORTH AMERICA, INC.

• Guide in RAM (4) with the holder and position it correctly.
• Tighten nuts (3).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (2).

• Secure all the cable brackets in area (1).
• Connect and lock all connectors in the area (1).

• Guide in RAM (4) with the holder and position it correctly.
• Tighten nuts (3).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (2).

• Secure all the cable brackets in area (1).
• Connect and lock all connectors in the area (1).

Follow-up work 

• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
• Refer to INSTALLING THE TOP LUGGAGE COMPARTMENT TRIM PANEL .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to RECONNECTING ALL BATTERY GROUND LEADS .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .