Remove central bass
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to REMOVING FRONT SEAT .
- Loosen screws (1).
- Remove speaker trim (2).
- Detach the air duct (3) towards the rear and remove.
- Raise the carpet (4) slightly.
- Fold up the carpet (1) as shown.
- Loosen screws (2).
- Unlock plug connection (3) and disconnect.
- Remove the central bass (4).