Installing the central bass
- Insert the central bass (4).
- Tighten down screws (2).
TIGHTENING TORQUE SPECIFICATION
| Central bass loudspeaker to floor assembly group | ||
|---|---|---|
| Nut | tightening torque | 5 Nm |
- Connect connectors (3) and lock.
- Fold the carpet (1) down.
- Correctly lay the carpet (4).
- Correctly position the air duct (3) and engage upward.
- Insert and install the speaker trim (2).
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATION
| Central bass speaker trim | ||
|---|---|---|
| screw | Tightening torque | 2 Nm |
Follow-up work
- Refer to INSTALLING FRONT SEAT .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .