Removing the power distribution box of the positive battery cables at the rear
Preliminary work
- Refer to DEACTIVATING THE 48V ELECTRICAL SYSTEM .
- Refer to DISCONNECTING BATTERY GROUND LEADS
- Refer to REMOVING REAR WINDOW STORAGE SHELF AT FRONT .
- Refer to REMOVING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to REMOVING THE LOADING EDGE TRIM .
- Refer to REMOVING THE RIGHT LUGGAGE COMPARTMENT COVER .
- Refer to REMOVING LED IN LUGGAGE COMPARTMENT ON RIGHT .
- Refer to REMOVING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Open cover (1).
- Release nuts (2) and remove the positive battery cables.
- Unlock plug connection (3) and disconnect.
- Release the detent (arrow) and remove power distribution (4).