Installing the low power distribution box
- Insert the power distribution box (2).
- Tighten plastic nuts (1).
tightening torque specification
| Power distribution box | ||
|---|---|---|
| Plastic nut with flange | Tightening torque | 2.6 nm |
- Tighten the positive battery cable using the nut (1).
tightening torque specification
| Positive battery cable | ||
|---|---|---|
| Positive pole screw | Tightening torque | 15 nm |
- Tighten the positive battery cables using the screws (2).
tightening torque specification
| Positive battery cable | ||
|---|---|---|
| M8x16 screw | Tightening torque | 15 nm |
- Clip in the cover (1).
Follow-up work
- Refer to CONNECTING ALL BATTERY GROUND LEADS .
- Refer to ACTIVATING THE 48V ELECTRICAL SYSTEM .